Studio rundown of a track………


Tonight’s blog, and yes Happy St. Patrick’s Day, is going to be different. I hope it doesn’t turn out in that “smelly kid with the stray eye” kinda different. Instead I’m trying for “cool idea that I didn’t know would be useful until I saw it” kind of different.

I am going to post a track that I produced and then run down what went into it and how we recorded it in the studio. The track is a song by Super 400. They are a Troy NY band. I signed them to Island Records and Managed them for about a year. I produced their first record.  Unfortunately for them their record came out a week before Edgar Bronfmann bought Island  Records. The first thing he did was drop 1/3 of the roster. Since the record was a month old when this decision was made they got the axe. So they returned to obscurity and left behind a fine major label record that no one has ever heard.

I signed this band when I saw them open for the Figgs on New Years Eve. They reminded me of a mix between Stevie Ray and Cream. They are a power trio with a hot woman on bass that really can groove, a monster drummer (his brother plays bass for Lenny I stole it all from the Beatles Kravitz) and a great guitarist. The guitarist plays a 50’s les paul tv model. At the time we made the record he was using an interesting rig for his sound. He had a Fender Bassman, set up for a pretty clean sound and a gibson Leslie cabinet. If you don’t know Leslie cabinets you should. They are a speaker system that was designed for organ. Although they often contain an amp that’s not what is unique about them. The real trick is the actual speaker system. It is split into two channels, highs and lows. All of the high part of the signal goes to a horn that resembles two small trumpet horns fused together. This is hooked to a motor. When you click on a switch [I’m listening to “To Love Somebody” By the Bee Gees. Yeah the fuckin’ Bee Gees! It’s a classic. Try writing a song that good some day…], right so when you click on the switch the horn starts to spin. It takes a few seconds to come up to speed and when you hit the switch again it spins down slowly. This gives you this beautiful warbling tone to all the high frequencies.  All the bass tones go to one 12″ or 15″ speaker. This is facing DOWN towards the floor. Yup, down..Crazy huh? Well this shoots the sound down into  a circular baffle system that also spins. This causes the bottom notes to warble at a different rate with a different spin up and spin down speed from the high-end. {Now I’m listening to “Academy Fight Song by Mission of Burma]

Ken Hohman of Super 400 used this beauty as the main speaker system. sometimes he would use the bassman alone, sometimes the leslie, sometimes both. He didn’t think this idea up. He picked it up from Stevie Ray Vaughn. I have no idea where Stevie got it but it’s been around for a long time.  The Leslie cabinet and the effects it produces have been used for at least sixty years on organs. In the sixties bands started to use them in the studio to get numerous cool effects. If you listen to Sgt. Peppers album by the Beatles they use leslie on vocals, guitars, drums – they use it everywhere. There is one simple reason that they do. It sounds really cool.

Ken’s set up was Les Paul into a splitter ( I think he had a rat pedal he used at times). One side of the splitter went to the amp the other to the leslie. Simple, foolproof, sounds great.

Super 400’s drummer Joe Daley was in love with Ludwig Lucite (sp?) kits at this time. He owned two or three of them. They were manufactured in the early seventies with the Rock Band market in mind. They have a unique sound. They don’t have rich tone like a wood shell drum. Instead they have a flatter more aggressive sound. He used remo coated skins for the whole session. This, I believe, was at my insistence. The drum kit had fresh skins almost every day. Especially on the snare drum. This is the only way to get a snare sound that consistently has snap and bite. Ludwig Vistalite kits appeared in a very famous TV appearance by a world renown nutcase drummer. They were also played by John Bonham of the unknown super group Led Zeppelin. To make these kits sound good you must play hard. These are not the kind of kits you use for light jazz gigs at Sunday brunch.

The Bass player Lori Friday played classic Fender basses. She played vintage Precision and Jazz basses. I don’t recall which bass she used on this track but it’s likely that it was her Precision. During parts of the session she played through an Ampeg b15 flip top amp. On this track she was playing her stage rig which was a large twin 15″ cabinet with a Vintage Ampeg head. It shows since her sound rocks through the whole record.

Now for the set up rundown. I’m going from memory but this should be close to the final setup for the song.

Drums: We were using a sixties attitude for miking the drums on many of the tracks for the album. The basic tracks, drums, bass guitar were being recorded in an old onion barn at my farm. This is a large (24 x 32) room with a 17 ft peaked ceiling. The whole room is made from 200 year old wood including the floor. This gives a very warm, rich sound.

On late sixties recordings the drum kit was often recorded with three mics. One about three feet in front of the kick. It’s set up high enough to get lots of kick but some of the general kit as well. The second mic is set up over the high hat about three feet above the hats pointing at the snare so it picks up snare and hi hat as well as the cymbals and general kit sound. The third and final mic is set up at the EXACT same height as the second mic but over the floor tom side. It points down and in towards the drummer. These two mics are designed to be panned hard left and right with the first mic panned in the center. This gives you basic fake stereo. The nice thing with this set up is, although it gives you stereo imaging on the drums, the fact that there are only three mics on the drum kit means there will  be almost no phase problems from the multiple mics. This is not the case with a drum mic arrangement with lots of close mics. [Neil Young -Cowgirl in the Sand] On this session we decided to add one mic which was a Shure sm57 close in on the top of the snare to make it pop in the mix and sound a little more modern.

The Bass was close miked about 3 ft out with a EV Pl20. Simple – sounds great.

Ken the guitarist was miked in two ways. The Fender Bassman had two AKG 414 mics close in on the speakers. We monkeyed around with them quite a bit until they seemed perfectly placed and in phase with [Beach Boys -Sloop John B -Great instrumentation!] each other.  For the Leslie set up we used to AKG 460 condenser’s in and X, Y stereo pattern (see first recording blog for an explanation). These were set about twelve inches out from the high frequency horn. For the bottom end we used one Neuman 87. One? Why one? The bottom speaker rotates and as a result has strong stereo effect. Wouldn’t you logically mic this in some kind of stereo? The correct answer is NO. The human ear cannot hear direction in sound below about 400 htz. This is why it’s often hard to perceive exactly which way distant thunder is coming from. Miking the bottom baffle system in stereo would be a waste and wouldn’t add to the cool effect. In fact the single mic works great since the warble in the bottom of a Leslie cabinet is perceived as changes in VOLUME NOT DIRECTION.

All of the mics were plugged into a late Seventies Yamaha 1604 recording console. This is a low end pro console that is often available for cheap. I bought it when it wasn’t so cheap. Great console. Very musical EQ’s. Decent routing. Really nice sounding preamps. This is the most important piece of any console.  From the mic preamps ALL MICS went into good quality compressors. For Bass, vocals, and drums the compressors were Urei LA4A. For the guitars I used DBX 160 and 160X. In general I compressed them pretty hard with a 4 to 1 ratio. I will discuss compression which is extremely important in rock recording in a future blog. All of the tracks that were compressed were then EQ’ed slightly. I added back about 1 or 2 DB or 6K, or 8K or 12K depending on what sounded best.  I did this because compression removes about that much of those frequencies. I was attempting to bring them back to FLAT EQ. This is a concept I will discuss in later blogs.

From the compressors the tracks went straight to a TAPE MACHINE. Yes, tape. This was , after all 1997. I still use tape but that is a luxury for most people nowadays. The tape machine I used was a Tascam 16trk 1 inch with no noise reduction.

This song was RECORDED LIVE. This is extremely important. The song varies a little from flat time but I think that the live feel works wonders on this song. We cut Drums, Bass, and guitars with a scratch vocal that we threw out later. Lead Vocals were overdubbed using a Neumann 87, into the Yahmaha console, into a Urei LA4A compressor set to 2 to 1 and then straight to tape.

The whole album was mixdown from the 16 trk 1 inch tape at Trax East Studios on an API console with automation and all the normal bells and whistles. There are not that many effects or EQ’s or tricks in the final mix. Most of the mix consisted of getting a careful balance.  So that’s it. A top to bottom description of a recording. Here’s the recording. See if you can hear the way the miking is done. Don’t worry if you can’t. The goal of a good recording is for the studio to be transparent, that is to say, what the studio does to the band shouldn’t be very apparent. That, of course, is my viewpoint. It is a decent recording, not the best but certainly good enough to appear on a major label and it was created using pretty basic gear. And what really counts when you’re trying to succeed at Rock is how great is the song and the band????

Super 400 – Drawing Circles                                                                                                                                                                                               Super 400

©Brad Morrison/Billiken Media 2010

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s